A Message Board, Guestbook, or Poll hosted for your website.
Elmer Keith Forums

Register Login New Posts
 
Elmer Keith Memorial Shoot > Forums > Six Shooters > Advice on where to start
 
Username:  
Password:  
 
   
 


Thread Tools Search This Thread 
Reply
 
Author Comment
 
tbbryan
Tenderfoot
Registered: 06/26/09
Posts: 1

Contact using AOL

    07/03/09 at 03:49 PMReply with quote#1

I have recently begun to enjoy big bore sixguns… a friend introduced me the .44 Mag. and .45 Colt.   I have always been a little recoil sensitive, but I am working on it.  I really did enjoy shooting both of them.  Even though my buddy had the .45 colt’s marked “hot loads”.  Did I mention that my buddy’s heroes are Elmer Keith and Skeeter Skelton? 

 

            After realizing that I could enjoy big bore revolvers my buddy gave me something else to think about… “Hell, I was there” Once I started reading about Elmer Keith I could not stop.  Reading his book was like I was sitting around the campfire beside Keith himself listening to him tell me about his life.  I have found myself wanting to purchase a big bore…

 

            My problem is that I need to find the following:  1) Something that I am not going to have to do a lot of work to.  2)  Something that is heavy enough to absorb recoil.  3)  Something that I can start with lighter loads and build up with.  4)  Something that can serve as an “all purpose” sixgun for a while until I can afford to diversify into other guns and calibers.  Can anyone give some advice as to make, model, and calibers that would meet what I am looking for? 

ChrisO
Moderator
Registered: 01/03/09
Posts: 140

    07/03/09 at 04:10 PMReply with quote#2

Hi tbbryan,
Sounds like you got that thing we call "Elmeritis" !  If your not a reloader I would start with a .45 Colt,  my choice would be a Ruger Blackhawk..barrel length depends on you but a 7 1/2" would serve.   Once you get used to that you might want to choose either Buffalo Bore or Grizzly ammo with some hotter factory loads that should handle most anything in the "lower 48". Keep you eyes open at used book stores or the internet for Mr. Keith's or Mr. Skelton's books. You might come accoss a bargin like I did and once you find them they'll be hard to put down or loan out !
Personally, I like the  Ruger Redhawk in .44 mag with a 5 1/2" bbl, But it is a little on the heavy side but should out live me, even with heavier 300 grainers as an every day load.
Take Care !
Chris from PA
albroswift
Avatar / Picture

Moderator
Registered: 06/02/08
Posts: 581

    07/03/09 at 04:23 PMReply with quote#3

Ha! Sounds like you are trying to start some trouble. I'll go second, Super Blackhawk in 44 mag or 45 colt, #2 S&W Model 29. easy to load for, easy to shoot, and a good bargain hunter should be able to get one for less then $500
Next?


__________________
“If it rolls, floats, flies or shoots, runs on gasoline or gunpowder, goes fast or shoots a big bullet and makes lots of noise, thus producing torque and recoil — it’s cool.”
SafarisAfrica
Avatar / Picture

Wildcat
Registered: 01/03/09
Posts: 109

    07/04/09 at 05:43 AMReply with quote#4

If he wants something easy to shoot get a Ruger Bisley I would lean toward the 44 mag but the 45 is almost as versatile especially in a strong gun.

Len


__________________
Len


http://www.safarisafrica-zimbabwe.com
ace
Wildcat
Registered: 06/14/08
Posts: 83

Contact using MSN

    07/04/09 at 08:12 AMReply with quote#5

Hi tb
A lot of us like the 44 rugers, I shoot 44 specials for most of my shooting, switch to mags fo long range stuff like 150 to 600 yds (really!).
Adjustable sights are nice and give a little more versatility, maybe a lot more, because different loads often shoot to a different point of aim.
Get a good gun and shoot it a lot.
have fun...ace

__________________
too damn old to die young
Creeker
Wildcat
Registered: 01/08/09
Posts: 53

    07/04/09 at 08:30 AMReply with quote#6

albroswift I love that picture.
__________________
God Bless,
Creeker

Dry Creek Bullet Works
Dry Creek Firewood
albroswift
Avatar / Picture

Moderator
Registered: 06/02/08
Posts: 581

    07/04/09 at 08:41 AMReply with quote#7

Thanks!
It's out a little south of Ace's place, near a little town called Electron, WA Population 39. Last time I went by it had a couple of flat tires.

__________________
“If it rolls, floats, flies or shoots, runs on gasoline or gunpowder, goes fast or shoots a big bullet and makes lots of noise, thus producing torque and recoil — it’s cool.”
KansasScout
Avatar / Picture

Straight Shooter
Registered: 12/29/09
Posts: 19

    01/01/10 at 12:41 PMReply with quote#8

I used to have a matched pair of Cimarron Model P 38/40's that I loved and used for Cowboy action shooting. I unfortunately sold them three years ago to fund a Martin guitar. I really like the 38/40 for the reduced recoil and they will deliver for you as well. It's the equivilant of the .40 S&W.
I will probably get another one because I stll have the dies and a number of loaded rounds left over. The only problem is lack of adjustable sights.
This round is a bit trickier to reload than a .44 but with a little practice can be done fine. That bottleneck brass kinks faster than moose turds on ice if you don't hold your mouth right.

KansasScout
Avatar / Picture

Straight Shooter
Registered: 12/29/09
Posts: 19

    01/01/10 at 12:48 PMReply with quote#9

What I forget to say before was, if your recoil conscious, the 38.40 WCF is a good starter. The Cimarron Mod P is "cheap" too. About $500 new. They even have them in stainless now. I really liked mine.
I personally think they are a great starter into SAA pistols.
Of course, Rugers have some definite advantages and if cost is no object I would pick them.
I had a 5 1/2" barrel and I really liked that length for shootability.
Your inner Elmer is calling...go get you a revolver and don't look back!
Previous Thread | Next Thread
Reply

  Bookmarks  
Digg Diggdel.icio.us del.icio.usStumbleUpon StumbleUponGoogle Google