Suppost to be working on the house...

Elmer Keith Forums

New Posts

Elmer Keith Memorial Shoot > Forums > Open Topic > Suppost to be working on the house...

Author

Comment

Moderator
Registered: 06/02/08
Posts: 581

	10/26/08 at 10:05 AM	Reply with quote	#1

...but spent a little time in the shop, fabb'd up a plate to mount my indexing spinner on the mini http://www.albroswift.com/offsetbase.htm __________________ “If it rolls, floats, flies or shoots, runs on gasoline or gunpowder, goes fast or shoots a big bullet and makes lots of noise, thus producing torque and recoil — it’s cool.”
Loading...

ace
Wildcat
Registered: 06/14/08
Posts: 83

	10/26/08 at 12:23 PM	Reply with quote	#2

I see porting in the future __________________ too damn old to die young
Loading...

Moderator
Registered: 06/02/08
Posts: 581

	10/26/08 at 06:36 PM	Reply with quote	#3

Quote: Originally Posted by ace I see porting in the future Porting for sure. How about Radial porting following the twist? or do a fishscale pattern on the muzzle with some of the scales being ports. Mostly thinking barrel and frame decorating like on hoggs website. Could also make gears, although with this spinner plate the tooth count would have to divide into 360 deg. PS What's that machine that looks like a bottle capper and cuts internal keyways called? __________________ “If it rolls, floats, flies or shoots, runs on gasoline or gunpowder, goes fast or shoots a big bullet and makes lots of noise, thus producing torque and recoil — it’s cool.”
Loading...

ace
Wildcat
Registered: 06/14/08
Posts: 83

	10/26/08 at 10:33 PM	Reply with quote	#4

the tool is a broach, pushed thru' by a press. sometimes one pass but maybe use a spacer behind it and make another one or more passes. __________________ too damn old to die young
Loading...

Bookmarks